Estamos comprometidos a brindar un servicio integral para productos de tubería de acero a clientes de todo el mundo.
M7 is one of the High Speed Tool Steels in the molybdenum alloy family, with tungsten, chromium and vanadium for strengthening. It has good hardenability and is very wear resistant. Very high resistance to softening at elevated temperatures and good toughness. Deep hardening response.
M7 is widely used for cutting tools in machining operations. Sendzimir rolls, segment and circular cutters, profile cutting tools, thread cutting drills and cold forming tools. M7 high-speed steel is used for making heavier construction drills where flexibility and extended drill life are extremely important. M7 molybdenum high-speed tool steels are mainly used for cutting tools in all machining operations. This steel exhibits good abrasion-resistance because of its carbon and vanadium contents. It is an excellent choice for premium tools which require an outstanding balance of red hardness, edge toughness and wear-resistance. It is especially suited for machining semi-hard, heat-treated steel at about 300-350 Brinell Hardness.
Chemical composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Mo |
V |
W |
|
1.3348 |
0.95- 1.05 |
0.70 max |
0.40 max |
0.030max |
0.030max |
3.50- 4.50 |
8.20-9.20 |
1.70-2.20 |
1.50- 2.10 |
M7 Steel Physical properties (average values) at ambient temperature
Modulus of elasticity [103 x N/mm2 ]: 217
Density [g/cm3 ]: 8.30
Thermal conductivity [W/m.K]: 19.0
Electric resistivity [Ohm mm2 /m]: 0.65
Specific heat capacity[J/g.K]: 0.46
