Estamos comprometidos a brindar un servicio integral para productos de tubería de acero a clientes de todo el mundo.
A tee is also called triplet,three way and “T” pieces and it can be used to either combine or split a fluid flow. Most common are tees with the same inlet and outlet sizes, but ‘reducing’ tees are available as well. it means the one or two ends are differ in dimension.due to thisdimension differ,the makes the tee fittings with the capacity tocontrol the volume when requried.
Pattern |
Weld |
Seamless |
Nominal size |
1/2”-48” (DN15-DN1200) |
1/2”-20” (DN15-DN500) |
Wall thickness |
2~100mm |
2~50mm |
Bend radius |
SCH5S-SCH160 ,XXS |
SCH5-SCH160 |
Butt Weld Equal Tee Dimensions of ASME B16.9:
Nominal Pipe Size(mm) |
Outside diameter |
Center-to-End |
|
Run (C) |
Outlet(M) |
||
1/2" |
21.3 |
25 |
25 |
3/4" |
26.7 |
29 |
29 |
1" |
33.4 |
38 |
38 |
1 1/4" |
42.2 |
48 |
48 |
1 1/2" |
48.3 |
57 |
57 |
2" |
60.3 |
64 |
64 |
2 1/2" |
73.0 |
76 |
76 |
3" |
88.9 |
86 |
86 |
3 1/2" |
101.6 |
95 |
95 |
4" |
114.3 |
105 |
105 |
5" |
141.3 |
124 |
124 |
6" |
168.3 |
143 |
143 |
8" |
219.1 |
178 |
178 |
10" |
273.0 |
216 |
216 |
12" |
323.8 |
254 |
254 |
14" |
355.6 |
279 |
279 |
16" |
406.4 |
305 |
305 |
18" |
457.0 |
343 |
343 |
20" |
508.0 |
381 |
381 |
22" |
559.0 |
419 |
419 |
24" |
610.0 |
432 |
432 |
Description:
ASTM A234:Standard
Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for
Moderate and High Temperature Service
ASTM A420:Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A403:Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings