Products

We are committed to providing one-stop service for steel pipe products to customers around the world.

RHS section,Hollow section,A53 steel pipe
BackYou are in :  Home  >  Products  >  Pipe Fitting  >  Pipe Flange
Product Gategory
Factory
  • RHS section,Hollow section,A53 steel pipe
  • RHS section,Hollow section,A53 steel pipe
  • RHS section,Hollow section,A53 steel pipe
  • RHS section,Hollow section,A53 steel pipe
  • RHS section,Hollow section,A53 steel pipe
  • RHS section,Hollow section,A53 steel pipe

Pipe Flange

Category : Pipe Fitting

Size: ½” (15 NB) to 48″ (1200NB)

Type: welding neck, slip on, blind, socket welding, threaded, lap-joint

Class:150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS

Material:

carbon steel A105, A420, S235, S235JR, P235GH,SS400,37.2

Stainless Steel 304/L,316/L,321,310S,347H,1.4301, 1.4404

ASTM A234 WP1/5/9/11/12/22/91

Duplex stainless steel: UNS31803, SAF2205, UNS32205, UNS31500

  • Description
  • Specification
  • Standard
  • Process
  • Packing

Weld Neck Flange

This flange type is designed to be connected by a butt weld connection to the pipe or equipment requiring a flanged joint. Welding neck provides good service under variety of temperature and pressure applications. A weld neck flange must specifiy the pipe schedule for the bore. Due to the welding neck, it is a popular choice on pressure vessels and for creating man-holes etc. These flanges are also knows as ANSI Flange or ASME B16.5 Flange


Slip On Flange

A slip on flange is designed to slip over the end of pipe. It allows for easy positioning before welding. Both the inside and outside of the pipe is welded on the slip on flange. The pipe is generally inserted all the way, inside the slip on flange, leaving only the gap equivalent to wall thickness of pipe.


Lap Joint Flange

Lap joint flanges use a stub end that is welded to the pipe. A ring flange fits loosely around the stub end, permitting easy flange alignment of the bolt holes. A lap joint flange is also called Van Stone or Stub Flange. The stub ends are available in three styles (Types A, B, and C) and two lengths (Short and Long).


Threaded Flange

Threaded flange is also called screwed flange or screwed-on flange. This type of flange is used where welding is not an option. Threaded flange is most commonly used on low pressure applications and smaller pipes.


Blind Flange

A blind flange is a solid flange with no bore or threaded hole and is used to close the end of pipe, fittings, valves or equipment. Blind pipe flange is also used for pressure testing equipment. Blind flange comes both as raised face and flat face.


Socket Weld Flange

Socket-weld pipe flanges are typically used on smaller sizes of high-pressure pipes. These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe.



No. Flange standard size Pressure rating Types
1 ANSI / ASME FLANGE B16.5 1/2"~24" LBS:150,300,400,600,900,1500,2500 SO,WN,IF,SW,TH,LF/SE,LWN,BL
2 ORIFICE FLANGE B16.36 1''~24” LBS:300,400,600,900,1500,2500 SO,WN,TH
3 LONG WELDING NECK FLANGE B16.5 1/2"~24" LBS:150,300,400,600,900,1500,2500 LWN
4 ASME B16.47-A (MSS SP44 FLANGE) 26"-60" LBS:150,300,400,600,900 WN,BL,
5 ASME B16.47-B (API 605 FLANGE ) 26"-60" LBS:75,150,300,400,600,900 WN,BL,
6 AWWA C207 FLANGE 4"-120" TABLE 2,3,4 CLASS B&D SO,BL,
7 API 590 FIG.8 FLANGE B16.48 1/2"~36" LBS:150,300,400,600,900,1500,2500 FIG.8
8 SPACER AND BLANK B16.48 1/2"~36" LBS:150,300,400,600 SPACER AND BLANK
9 BS4504 FLANGE DN10-2000 PN:2,5,6,10,16,25,40 CODE:101,111,112,113,105
10 SABS 1123 FLANGE DN10-600 KPA: 600,1000,1600,2500,4000 SO,WN,SW,TH,LJ,BL
11 JIS B2220(KS B1503) FLANGE DN10-1500 5K,10K,16K,20K,30K,40K SO,WN,SW,TH,LJ,BL,
12 GOST 12820/1-80 DN15-1200 PN:1,1.6,2.5,4,6.3,10 SO,WN
13 AS 2129 FLANGE DN15-1200 TABLE:D,E,F,H SO,BL,
14 NS FLANGE DN15-800 PN: 6,10,16,40 SO,BL,
15 VSM FLANGE DN15-800 PN: 6,10,16

Standard

Specification

ASTM A105

Standard Specification for Carbon Steel Forgings for Piping Applications

ASTM A350

Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

ASTM A182

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

ASTM A404

Specification for Forged or Rolled Alloy Steel Pip Flanges, Forged Fittings, and Valves and Parts Specially Heat Treated for High-Temperature Service (Withdrawn 1974)

ASTM A234

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

ASTM A420

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

ASTM A403

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

ASTM A694

Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

Inquiry Online

Recommended Products